Description
weberset+one+fix_0320_R03_0 (1).pdf
Weberset One Fix is grey coloured , water resistant, “Single Component” , latex fortified (with additives) cement-based , ultra-thick bed adhesive.
Usage:
Suitable for fixing Ceramic Floor Tiles, Virtified Homogeneous Tile, Porcelain Tiles, Quarry Tiles, Terracotta, Marbles , Granites, Slates, Terrazzo, etc, to floor , dry or wet, interior or exterior areas.
General Performance
Weberset One Fix is fortified with additive. Requires mixing with clean water only ;therefore eliminate use of expensive Latex Admixture and allows for easier on-site mixing. More economics or user-friendly compare to conventional two-component adhesive system. set
one fix offers improved adhesion strength, flexural strength, durability and reduce water permeability, improved workability, extended open time and better transfers; compared to conventional cement-based adhesive.
It is specially formulated for the installation of “Large Format” Vitrified or Porcelain Homogenous Tiles (or other tiles) & Marble or Granite Slabs with low water absorption rate (ie. < 0.5%); without the likelihood of “sinking or sagging” that may result in uneven finish surface. Designed for the installation of large format tiles or natural stone slab in single operation.
The set adhesive is water resistant but not impervious to water. set one fix is a ultra-thick adhesive used normally at 6 – 15 mm bed thickness Although in most cases it requires mixing with water only; there is special conditions where Latex Admixture (ie. mix admix 1, mix admix plus, mix multibond etc.) must be used with set one fix, to further enhance the physical properties of the set adhesive.
Not recommended for use on skim-coat plaster, paint and metal.
